inpink logo


    Abom79

    HD
    37:48
    автор | дата 08.12.2018
    • 44068
    • 2877
    • 23
    Проголосовало пользователей: 2900
    Jump to 15:21 for the machine work. We finish out the new shaft for the K&T electric motor this week, finishing out the lathe work. Also we have a couple of hand made tools for the shop. Support on Patreon: https://www.patreon.com/abom79 Abom79 & Booth Machine T-shirts & Hoodies https://www.storefrontier.com/store/abom79
    ЕЩЁ
    • СКАЧАТЬ
    автор | дата 09.09.2017
    First of a short series of videos about machining a 9 1/2" gearbox shaft. This shaft is very similar to my past Heavy Metal Machining series, so I try and give you ...
    • СКАЧАТЬ
    автор | дата 03.10.2018
    I begin the machine work on the Fireball Tools Fixture plate for use in my machines and fixturing for machine work. This is a rough casting as it was sent to me ...
    • СКАЧАТЬ
    автор | дата 31.03.2018
    This week I machined the new acme threaded nut for the G&E shaper tool head. This was in an attempt to reduce the backlash from the original nut. I share how I ...
    • СКАЧАТЬ
    автор | дата 29.08.2018
    Quick job removing a broken ez-out and brass pipe fitting from a carburetor. Want to support this channel? https://www.patreon.com/abom79 Abom79 t-shirts ...
    • СКАЧАТЬ
    Mounting Porsche 944 brakes on VW Beetle spindles is tricky. A lot of the fitment is pretty close, but some bearing spacers or spindle sleeves would be ...
    • СКАЧАТЬ
    I stoppped by Abom79's shop to get caught up, haven't seen him in a while since his Youtube success. We also discussed my Porsche 944 brakes that need to ...
    • СКАЧАТЬ
    автор | дата 07.11.2015
    The winner of the South Bend gears is announced! For those interested please visit Kane Monroe's website to purchase a set of gears for your lathe.
    • СКАЧАТЬ
    автор | дата 27.11.2018
    Video of my first trip to Fabtech, this one being in Atlanta Georgia. We visited for two days of the event and this will be a two part video. I had a great time! Please ...
    • СКАЧАТЬ
    автор | дата 06.10.2018
    Getting started on the rotor shaft for the electric motor, I run into some issues that didn't surprise me, so my plan takes a slight detour. Want to help support this ...
    • СКАЧАТЬ
    автор | дата 21.07.2018
    In this video I get paid a visit by Adam Booth from the channel Abom79. I also show my viewers my attempts at sharpening a tap on the cutter grinder. I got some ...
    • СКАЧАТЬ
    автор | дата 05.12.2018
    I was privileged to stop by Andrew Alexander's shop, also known as Blacksmith Tools while I was in Texas. Andrew has an absolutely amazing collection of ...
    • СКАЧАТЬ
    автор | дата 05.12.2018
    Second half of my shop tour with Andrew Alexander @Blacksmithtools. In this video we get to see more of Andrews classic and antique machines, tools, and ...
    • СКАЧАТЬ
    автор | дата 01.09.2018
    As I continue with the custom internal bar for the shaper, I use a piece of 4" bar stock to machine a hex nut that'll be used to retain the bar. I decided to use the ...
    • СКАЧАТЬ
    автор | дата 01.12.2018
    This week I get started on the motor shaft for the K&T mill. I'll complete all of the roughing in on this episode and next week we'l finish it. Jump to 15:20 if you juts ...
    • СКАЧАТЬ
    автор | дата 17.11.2018
    This week I share some footage of a gearbox shaft I machined. Some heavy turning in the pacemaker, milling of the key ways, an final shots. I also give some ...
    • СКАЧАТЬ
    автор | дата 03.11.2018
    I complete all of the machining on the top side of the fixture plate including all of the tapped and reamed holes that will be used with hold down hardware.
    • СКАЧАТЬ
    автор | дата 24.11.2018
    I bring home a few more of my tools that's been in storage, go over some viewer mail from Europe, and show you a shop project I did at work building a sheave ...
    • СКАЧАТЬ
    автор | дата 21.10.2017
    This week we get to some machining on the Kearns horizontal boring mill, doing some deep hole drilling and tapping. I also share a few clips from a couple ...
    • СКАЧАТЬ
    автор | дата 08.12.2018
    I acquired a Carton Radial Arm drill for the shop. This video is about me receiving it and bringing it home.
    • СКАЧАТЬ
    автор | дата 16.04.2014
    This week I finally get started on the job for our friend James Green. He sent a lathe spindle to me and asked if I would do the machine work to fit a spider nut on ...
    • СКАЧАТЬ
    автор | дата 13.04.2017
    Don't be that guy! Here are 10 things you can do to stay clean and organized, and not piss off your coworkers.
    • СКАЧАТЬ
    автор | дата 24.11.2013
    In this video I repair a worn out forklift axle housing that belongs to my good friend Joe from the welding shop. This piece of equipment is a vital part of his ...
    • СКАЧАТЬ
    автор | дата 26.03.2016
    This video is the first of new series involving the machining of a new gearbox shaft. The material is 9 1/2" 4140 by 62" Long. To start with, I have to press the old ...
    • СКАЧАТЬ
    автор | дата 14.03.2017
    This was the project I worked on back on Superbowl Sunday. I continued on with some hand scraping of the angle plate, followed up by fly cutting the long side ...
    • СКАЧАТЬ
    автор | дата 10.11.2018
    Wheel repair for a family member. One of the tie rods broke looks and jammed the other through the rim. They've had no luck finding a used replacement so ...
    • СКАЧАТЬ
    автор | дата 10.06.2013
    I made this video to introduce myself to everyone, talk about my past, where I learned the trade from, and how my new shop is coming along.
    • СКАЧАТЬ
    автор | дата 30.12.2017
    In this video I get the lathe finishing done in the lathe. Turning all of the journals to size, cutting the radius's and angles, and polishing.
    • СКАЧАТЬ
    автор | дата 07.12.2014
    The start of a new project for the shop. I've been needing a new steady rest for the Monarch, so I decided to adapt one from another lathe to fit. Part 1 or probably ...
    • СКАЧАТЬ
    автор | дата 08.07.2017
    To get right to the tool comparison https://youtu.be/PBCdYcsD--g?t=4m34s Shop upgrade segment https://youtu.be/PBCdYcsD--g?t=32m49s This week, we ...
    • СКАЧАТЬ